AR Plate: AR MED, AR400F, AR500
from 3/16″ thick
Widths up to 120″
A-36 (HR, HRP&O), A572, A516-70, A588, A514(T-1):
from 3/16″ thick
Hot Rolled A1011 (HR, HRP&O):
from 16ga thick to 7ga
Cold Rolled CQ:
from 24ga thick to 10ga
from 26ga thick to 7ga
Plate and Sheet
Used for structural applications, carbon steel plate and sheet in hot rolled, pickled & oiled, and cold rolled are produced from ingots and slabs made by the continuous cast, the basic-oxygen, or electric furnace processes. This material is readily formed and welded using conventional methods.
In addition, general purpose high strength low alloy steel offers optimum combinations of strength, weldability and notch toughness, at a reasonable cost. Used in construction of bridges, buildings, automobiles, truck parts, railroad cars, cargo containers, construction equipment, line pipe and structural tubing, lighting standards and transmission poles.
Abrasion-resistant plate is a hot rolled plate with higher carbon content. This plate is hard and tough with excellent abrasion resistance. It can be machined, drilled, punched and formed within limits. Applications include conveyors, mixers, dirt and stone moving equipment, dump truck bodies, bucket lips, liner plates, and coal and rock screens.
Galvanized sheets are continuously hot-dipped with a protective coating of zinc. Coating is G90 (1.25 oz per square foot). Galvanized sheets can be formed, rolled or otherwise fabricated at room temperature without disrupting their protective qualities. Applications include heating and ventilation ducts, roof flashing, electrical boxes, and many general maintenance applications.
Grades of Plate include: A36, Grade 50, A572, AR400, AR500, A514, XF100, and Hardox® 450
We also have a variety of additional cutting and metalworking equipment capabilities in house to provide additional value to our customers. For fast service and competitive prices, Contact us to get a free estimate at the location nearest you.